X6 HOT AIR BALLOON AROMA DIFFUSER
Getting started.
Made simple.
Watch the video, then follow the steps below.
Full portrait video · Open video ↗
Unable to play the video? Select “Open video” or follow the instructions below.
QUICK START
Your first use, step by step.
4 steps to start the mist, light and sound.
Lift the cover and add water
Use clean tap water. Do not fill above the MAX line. The tank capacity is 260mL.
Connect the USB-C power cable
Connect the cable to the device and use a power adapter with a DC 5V / 2A output.
Press the power button
Mist, warm light and the indicator light turn on together. An engine startup sound plays.
Want music? Connect to “X6”
Open your phone’s Bluetooth settings and connect to X6. “Connected” confirms pairing. Skip this step if you do not want to play music from your phone.
CONTROLS
Know your controls.
Tap a control to see what a press or a hold does.
Power buttonOn / Off / Timer
- Press once
- Turn on the mist, warm light and indicator light. An engine startup sound plays, and the yellow light gradually brightens.
- Press again
- Turn off the device and all functions. You will hear “Power Off.”
- Press and hold to cycle through the timer
- Each long press selects the next option.1st hold3 hours2nd hold6 hours3rd holdTimer off
Light buttonLight mode / Brightness
- Press to cycle through modes
- Warm light → Color cycle → Hold the current color → Light off.
- First press and hold
- The light gradually dims.
- Press and hold again
- The light gradually brightens.
Found a color you like? Press the light button during the color cycle to keep the current color.
Music buttonBluetooth / White noise / Next track
- Press and hold for 3 seconds
- Switch between Bluetooth mode and white noise mode.
- Press once
- Skip to the next track in Bluetooth or white noise mode.
- Connect your phone
- Hear “Bluetooth Mode” → Open your phone’s Bluetooth settings → Connect to “X6” → Hear “Connected.”
White noise starts automatically in white noise mode. Press the music button to change the sound.
Volume knobVolume / Mute
- Turn left
- Lower the volume.
- Turn right
- Raise the volume.
- Press the knob
- Mute or unmute the sound. When entering mute mode, you will hear “Mute Mode” before all sound stops.
Remote controlLight / Timer / Music
- Top six buttons
- Power, continuous brightness adjustment (press and hold), mute, timer, light mode, and Bluetooth / white noise mode.
- Volume − / Volume +
- Press and hold the corresponding button to lower or raise the volume.
- Playback controls
- Previous track, pause / play, and next track.
BEFORE YOU USE
A few things to keep in mind.
Keep water below the MAX line
Too much water can reduce mist performance. Never exceed the maximum fill line.
Use the correct power supply
Use DC 5V / 2A input. Other power specifications may affect mist output or damage the device.
Keep the atomizing plate clean
Scale or buildup may reduce mist output or cause blockage. Disconnect the power first, then gently wipe the plate with a cotton swab.
Some operating sound is normal
Sound from the mist mechanism inside the tank is normal during operation.
NEED HELP?
Let’s check the basics.
Find your question and follow the checks below.
No mist, or less mist than usual?
- Check the water level: Make sure it is below the MAX fill line.
- Check the power: Make sure the cable is connected and the adapter output is DC 5V / 2A.
- Check the atomizing plate: If there is scale or buildup, disconnect the power and gently wipe the surface with a cotton swab.
Which Bluetooth name should I look for?
Find and connect to “X6”. Make sure the device is in Bluetooth mode. Press and hold the music button for 3 seconds to switch between Bluetooth and white noise modes. You will hear “Connected” when pairing succeeds.
How do I play white noise?
Press and hold the music button for 3 seconds to switch to white noise mode. White noise starts automatically. Press the music button once to move to the next sound.
Bluetooth is connected, but there is no sound.
Make sure music is playing on your phone and check its volume. Turn the device’s volume knob to the right to increase the volume. If the device is muted, press the knob to unmute. If there is still no sound, contact the store where you purchased the product.
Is noise inside the water tank normal?
Sound from the mist mechanism inside the tank is normal during operation. If it is accompanied by other unusual behavior, describe the issue to the store’s customer support team.
How do I keep one color or turn the light off?
Press the light button to cycle through Warm light → Color cycle → Hold the current color → Light off. During the color cycle, press once to keep the current color, then press again to turn the light off.
How do I set or cancel the timer?
Press and hold the power button to cycle through the timer settings: first long press for 3 hours, second for 6 hours, and third to cancel the timer.
Still need help?
Contact the store through your purchase order.
Describe the issue, share your power adapter specifications, and include a short video of what happens.
Specifications & box contents
- Model
- X6
- Rated power
- 10W
- Rated input
- DC 5.0V / 2A
- Tank capacity
- 260mL
- Mist output
- 10–30mL/h
- Dimensions
- 128 × 128 × 208mm
- Weight
- 300g
- Materials
- ABS / PP / Electronic components
- Applicable standards
- GB/T 4706.1-2024
GB/T 4706.48-2024 - Made in
- China
In the box
Aroma diffuser ×1 · USB-C power cable ×1 · Chinese / English instruction manual ×1